As a strong and stylish way to prevent falls, they need to be built and put together properly to make sure safety and good looks. You can read more about these glass problems on our blog. It's easy to make mistakes when it comes to glass balustrades in New Zealand.

Taking accurate measurements of your balustrades

The first step in making a glass balustrade is to correctly measure, which is also where most mistakes happen. Getting accurate measurements for your balustrades is very important for a good glass balustrade installation, so it is very important that you get precise measurements. These steps are important because they allow the panels to fit perfectly into the space that's available, giving the building the safety and good looks it needs.

This part is prone to a number of common measurement mistakes. These mistakes can happen for many reasons, such as using the wrong tools, not measuring twice, misreading the tape measure, missing important measurements, and more. This could lead to bad things, such as

Leaks: If the sizes are too small, there may be holes in the panels or between the glass and the frame. These gaps are not only ugly, but they also make the railing less stable and safe.

Fits That Are Too Tight: If the measures are too big, the glass panels won't fit right. If you try to push them in, the glass could get stressed and break or crack.

If you want to avoid common measurement mistakes, use accurate and good measuring tools, such as a laser measurer or a trustworthy tape measure. Always take two readings to be sure you're right. Measure the required height, width, and depth, making sure to account for any obstacles or parts that may need to be there.

Know the manufacturer's limits to avoid gaps or tight fits as much as possible. If you're not sure how to handle the project's difficulty or your level of skill, you might want to hire a professional. These tips will help you put up a glass railing NZ in a way that looks good, is safe, and follows the rules.

Knowing the rules for making glass balustrades

After measuring your space for balustrades, it's important to follow any safety rules and building codes that the maker gives you. These rules and standards are meant to make sure that your glass balustrade installation lasts a long time, is safe, and follows the law.

When it comes to Building Regulations, mistakes are frequent and can cause big legal problems as well as safety risks. If you follow the rules, you can avoid fines, changes that cost a lot of money, and higher accident risks.

You can stay away from these by reading the rules and regulations ahead of time. If you're still not sure, talk to an expert or hire someone who is. That way, you can be sure that the work will follow all safety and legal rules.

Building codes say that glass balustrades in private places like homes can't be less than a certain height. This is 900 mm for stairs and steps inside a single-family home and 1100 mm for roof edges and exterior balconies like Juliette balconies. Both are measured from the finished floor level. Staircases should be at least 900 mm high in household, commercial, educational, institutional, or public buildings, and at least 1100 mm high in all other types of buildings.

Picking the Right Balustrade Glass

It is very important to know what kinds of glass are out there and pick the right one for your railing. Toughened glass and toughened/laminated glass are the two types of glass that are most often used. Laminated glass has at least two layers of glass that are joined together by a plastic layer that keeps the glass in place even if it breaks. Toughened glass is much stronger and less likely to break when it hits something.

A typical mistake is picking the wrong type of glass. Most experts, including Totally Glass, say that you should use toughened glass or toughened glass that has been coated. If you choose glass that hasn't been toughened, it could break when it hits something, making a very unsteady and dangerous barrier. When it comes to glass balustrades, toughened or toughened and laminated glass makes a better barrier that gives you the security you need and lasts longer.

Installation by experts

Why hiring a professional is a good idea

For a perfect and safe fitting, you should have a professional, like Totally Glass, put up your glass Splashbacks NZ. The professionals know how to choose and install the right tools and materials, which is very important for making sure the balustrade lasts and is safe. They also use the best methods when working with glass panels, which makes it less likely that damage will happen during installation.

Common Problems with Installation

If you choose to work with an inexperienced user, you may make one of these common mistakes:

Lack of Quality Hardware and Materials: Using poor quality or wrong hardware could damage the balustrade's structure and put people at risk.

Handling Glass Panels Carelessly: If glass panels are not handled carefully during installation or transport, they could break or chip. This changes not only how the railing looks but also how safe it is.

Bad Installation Methods: Installers who aren't very good at what they're doing can make setups that aren't level or stable, as well as joints that aren't strong enough to hold up under stress.